Search

Kansas City Smoke Shop

Electronic Cigarette, Vaporizer, Smoking Glass Pipes and Much More

Tag

Vaporizer

Joyetech eGo ONE VT Starter Kit – 2300mAh Smoke Tokes Kansas City Smoke Shop

Joyetech eGo One CT Starter Kit – 1100mAh

Joyetech eGo One CT Starter Kit – 1100mAh, applies Joyetech constant temperature technology. Three modes: CT-Ti (Titanium)/CT-Ni (Nickel)/CW mode are available. With five colors, and various atomizer heads, you have many choices and fun.

Parameters

eGo One CT battery

Size (length x diameter): 140 x 19mm

Capacity: 1100mAh

eGo One atomizer:

Capacity: 1.8ml

eGo One CT Starter Kit Comes with

1 x eGo One CT battery

1 x eGo One atomizer, 1.8ml (no head)

1 x eGo One CL-Ni Atomizer head (0.2ohm)

1 x eGo One CL-Ti Atomizer head (0.4ohm)
1 X eGo One CL head (1.0ohm)

1 x USB cable
1 x AC adapter
1 x User manual

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

Features

CT-Ni, CT-Ti/CW Mode Applied
Tiny Shape with Easy Operation
Varied Levels of Watts and Temps
Many Color Options

Power on and off: press the button for 5 times in quick succession, the button light will flash 5 times to indicate eGo ONE CT is ready for use. In the same way, eGo ONE CT will be powered off after 5 presses.
Vaping: press the button and inhale or vape. When the button is held down, the button light will be on.
Charging: simply charge eGO ONE CT by connecting it with a computer or a wall adapter via USB cable. When it’s fully charged, the button light will go out.
Shift Between CT-Ni/CT-TI/CW Modes: when the device is off, long press the fire button, you can shift between CT-Ni/CT-Ti/CW modes within 2 seconds. And release the fire button to preserve the current mode.

Note: only use temp control coils under CT mode. Damages will be caused when temp control coils are accidentally used under CW mode.
Adjustment of levels: when it’s powered on, press the fire button three times to shift among Low/Medium/High levels of Wattage (under CW mode)/temperature (or CT mode) to your preference.
Output Levels for eGo One CT (CW mode)

0.4-0.8ohm 0.81-1.6ohm 1.61-3.5ohm
25W 15W 7.5W

Temp Leavels for eGo One CT (CT Mode)

CT-Ti CT-Ni
470℉ 480℉

Battery display function: the light will flash slowly or stay lit when battery level is high, on the contrary, the light flashes in frequency.
Battery quantity     Light condition
60% – 100%           Stay lit
30% – 59%             Slowly flashes
10% – 29%             Moderately flashes
0 – 9%                    Flashes in frequency
The battery light flashes red when charging or connecting with USB, and goes out in 5 seconds when it is fully charged.
Soak the atomizer head: when using a new atomizer head, please drip a few drops of e-juice in the cotton of atomizer head to reach the best performance.
E-juice filling: separate the atomizer from the battery and inject the liquid directly into the cambered slot.

Available at smoke shop smoke tokz kansas city smoke shop located at 1263 w 103rd street overland park ks 64114

Kangertech Subox Mini Starter Kit Available at Smoke Tokes Kansas City Smoke shop

Kangertech Subox Mini Starter Kit

Product Introduction

With the delicate appearance, kangertech subox Mini Starter kit works with OCC 0.5ohm, 1.5ohm coils. The improved RBA makes kanger subox mini can work in higher wattage. Also it’s very easy to change RBA and occ coils.

Kanger Subox Mini Parameters

Thread: 510

Subtank Mini Capacity: 4.5ml

Suitable for atomizer of 0.3ohm to 1.6ohm.

Material: Stainless Steel+Pyrex Glass

Kanger Subox Mini comes with

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

Kanger Subox Mini Features

1. 510 Drip Tip
2. Improved RBA, work in higher wattage
3. NEW Airflow design
4. KBOX Mini, wattage up to 50W
5. Easy to change RBA and OCC coils

Kangertech Subox Mini Starter Kit

How to use

1, Press the fire button 5 times in quick succession to turn the device on/off.

2, After switch on, OLED display “Kanger Tech” at stand by mode.

3, Press “+”, “-” to adjust the output wattage.

4, OLED screen will display the attached atomizer resistance value, voltage, wattage and remaining battery level.

5, plug in the USB cable to charge. OLED display charging state.

Kangertech Subox Mini Starter Kit

SMOK Subohm VCT Pro Vapor Chaser Tank – 5ml( Kansas City Smoke Shop Smoke Tokz 64114

SMOK Subohm VCT Pro Vapor Chaser Tank – 5ml

Product introduction

SMOK Subohm VCT Pro Vapor Chaser Tank – 5ml,  is the upgrade version of original VCT.  Redesigned rectangle shaped intake holes on the atomizer enlarge surface area contacting e-liquid, the VCT Pro can work perfectly with the thicker VG juice. Pure organic cotton and USA made wires, pure taste. New drip tip with heating fan, easy and better to control airflow and reduce heat.

Parameters

Dimension: 22mm x 71.5mm

Materials: glass & stainless steel

Capacity: 5ml

Thread: 510

SMOK VCT Pro comes with

  • 1 x 1pc compelete VCT Pro tank (0.2ohm coil pre-installed)
  • 1 x replacement glass tube
  • 1 x 0.6ohm VCT Pro E2 coil (30 – 80W)
  • several pcs rubber silicon ring

Simple packing. Customary packing from the factory, the packing is subject to change without notice.

Features

1. Enlarged e-juice inlet holes

2. Application with thicker VG ejuice

3. New drip tip with heating fan

SMOK Subohm VCT Pro Vapor Chaser Tank - 5ml

How to fill e-juice: turn upside down the atomizer and screw off the atomizer base; fill in less than 5ml e-juice into the tube, pay attention not to drip it into the central airflow tube; screw the core off the bottom base and drop 4 – 5 drops of e-liquid into the core and screw up the base; screw coil back to base, screw atomizer base and coil back to the tube.

SMOK Subohm VCT Pro Vapor Chaser Tank - 5ml

Note: please put the atomizer on the table for a few seconds to let the organic cotton completely soaked.

Atomizer core replacement: Firstly, screw the base part off the atomizer; then screw the atomizer core of the base part and replace with a new one.

SMOK Subohm VCT Pro Vapor Chaser Tank - 5ml

  • It comes with 510 thread, fit all 510 thread batteries.
  • You can select the e-juice here.
  • It uses special coils, which will be available later.

SMOK Subohm VCT Pro Vapor Chaser Tank - 5ml

WISMEC 40W Presa Express Kit 2600mAh OLED Screen MOD Battery (Smoke Tokes Kansas City Smoke Shop)

WISMEC 40W Presa Express Kit 2600mAh OLED Screen MOD Battery

Product Introduction

WISMEC 40W PRESA VV/VW Battery, is inspired by an ergonomically sculpted design to fit your hand. The enlarged fire button was designed so you can comfortably grip the Presa in many different ways. It has a modern appearance with an aesthetically pleasing design. The feature of the Presa meets the demands that vapor-chasers desired. On top of that, Presa can handle up to 40W/10V with 2600mAh battery capacity making a full-power vape production more quickly and with ease.

Parameters

Size: 81.9 x 34.9 x 24.4mm

Colour: Black and Silver
Battery Capacity: 2600mAh
Rated Output Wattage: 5W-40W
Rated Output Voltage: 2V-10V

WISMEC 40W PRESA Express Kit comes with

  • 1 x Presa
  • 1 x Manual

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

Features

Unique Appearance with OLED Screen: The fire button is over-sized so that you can press it for a puff more easily. The arc design makes it a perfect fit for your palm. One can view battery power/vaping seconds/working voltage/wattage clearly from the OLED screen. In this case, vaping will be more digitize and visualize.

40W WISMEC Presa 2600mAh OLED Screen MOD Battery
Enhanced Button Lock Function: Presa adopts two kinds of lock function: fire button lock function( Move the lock switch which is near the top of battery right/left, the fire button could be locked/unlocked) and up/down adjustment buttons lock function(keep pressing up/down adjustment buttons simultaneously for 2 seconds to lock/unlock them). In this case, all the buttons of Presa could have a longer service life.

Kansas City Smoke Shop

Switchable VV/VW Mode: There are two modes for users to adjust the working condition of Presa: VV mode and VW mode. Through quick pressing the fire button 3 times, one can switch between these two modes and easily choose one according to habits.

40W WISMEC Presa 2600mAh OLED Screen MOD Battery

40W Output Wattage and 2600mAh Battery Capacity:Presa can handle up to 40  watts/10 volts under the support of 2600mAh battery capacity. Cloud vapor production will be produced easier and could last longer.

Temperature Protection Feature: The output will shut off automatically and the screen will reflect “Temp Protection” for 5 seconds once the temperature of device is over 70℃. In this case, Battery will not be overheated which is safer for users.

510 Spring Loaded Connector: The spring connection base ensures high adaptability and durability for you to connect different atomizers with Presa.


How to charge

The Presa is charged via tail USB port. It will take about 3-3.5 hours to fully charge the battery with 1A charger.
The battery power symbol on OLED screen will keep slowly flashing during charging and go out when the battery is fully charged.

40W WISMEC Presa 2600mAh OLED Screen MOD Battery

  • It comes with 510 thread, can work with ego/510 threaded clearomizers/tanks.
  • No cartomizer/tank comes with.
  • There is CE mark on battery end.

40W WISMEC Presa 2600mAh OLED Screen MOD Battery

New PAX available at headsmokeshop kc 1263 w103rd street,kansas city,missouri,64114.

New PAX premium vaporizer i.e PAX -I and PAX-II are available in stock at the new smoke shop

SMOKETOKZ 1263 w 103rd street,kansas city,mo,64114.

Blog at WordPress.com.

Up ↑