CBD e-liquid Olathe

SMOK Subohm VCT Pro Vapor Chaser Tank – 5ml

Product introduction

SMOK Subohm VCT Pro Vapor Chaser Tank – 5ml, is the upgrade version of original VCT. Redesigned rectangle shaped intake holes on the atomizer enlarge surface area contacting e-liquid, the VCT Pro can work perfectly with the thicker VG juice. Pure organic cotton and USA made wires, pure taste. New drip tip with heating fan, easy and better to control airflow and reduce heat.

Parameters

Dimension: 22mm x 71.5mm

Materials: glass & stainless steel

Capacity: 5ml

Thread: 510

SMOK VCT Pro comes with

1 x 1pc compelete VCT Pro tank (0.2ohm coil pre-installed)
1 x replacement glass tube
1 x 0.6ohm VCT Pro E2 coil (30 – 80W)
several pcs rubber silicon ring

Simple packing. Customary packing from the factory, the packing is subject to change without notice.

Features

1. Enlarged e-juice inlet holes

2. Application with thicker VG ejuice

3. New drip tip with heating fan

How to fill e-juice: turn upside down the atomizer and screw off the atomizer base; fill in less than 5ml e-juice into the tube, pay attention not to drip it into the central airflow tube; screw the core off the bottom base and drop 4 – 5 drops of e-liquid into the core and screw up the base; screw coil back to base, screw atomizer base and coil back to the tube.

Note: please put the atomizer on the table for a few seconds to let the organic cotton completely soaked.

Atomizer core replacement: Firstly, screw the base part off the atomizer; then screw the atomizer core of the base part and replace with a new one.

It comes with 510 thread, fit all 510 thread batteries.
You can select the e-juice here.
It uses special coils, which will be available later.

WISMEC 40W Presa Express Kit 2600mAh OLED Screen MOD Battery

Product Introduction

WISMEC 40W PRESA VV/VW Battery, is inspired by an ergonomically sculpted design to fit your hand. The enlarged fire button was designed so you can comfortably grip the Presa in many different ways. It has a modern appearance with an aesthetically pleasing design. The feature of the Presa meets the demands that vapor-chasers desired. On top of that, Presa can handle up to 40W/10V with 2600mAh battery capacity making a full-power vape production more quickly and with ease.

Parameters

Size: 81.9 x 34.9 x 24.4mm

Colour: Black and Silver
Battery Capacity: 2600mAh
Rated Output Wattage: 5W-40W
Rated Output Voltage: 2V-10V

WISMEC 40W PRESA Express Kit comes with

1 x Presa
1 x Manual

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.

Features

Unique Appearance with OLED Screen: The fire button is over-sized so that you can press it for a puff more easily. The arc design makes it a perfect fit for your palm. One can view battery power/vaping seconds/working voltage/wattage clearly from the OLED screen. In this case, vaping will be more digitize and visualize.

Enhanced Button Lock Function: Presa adopts two kinds of lock function: fire button lock function( Move the lock switch which is near the top of battery right/left, the fire button could be locked/unlocked) and up/down adjustment buttons lock function(keep pressing up/down adjustment buttons simultaneously for 2 seconds to lock/unlock them). In this case, all the buttons of Presa could have a longer service life.

Switchable VV/VW Mode: There are two modes for users to adjust the working condition of Presa: VV mode and VW mode. Through quick pressing the fire button 3 times, one can switch between these two modes and easily choose one according to habits.

40W Output Wattage and 2600mAh Battery Capacity：Presa can handle up to 40 watts/10 volts under the support of 2600mAh battery capacity. Cloud vapor production will be produced easier and could last longer.

Temperature Protection Feature: The output will shut off automatically and the screen will reflect “Temp Protection” for 5 seconds once the temperature of device is over 70℃. In this case, Battery will not be overheated which is safer for users.

510 Spring Loaded Connector: The spring connection base ensures high adaptability and durability for you to connect different atomizers with Presa.

How to charge

The Presa is charged via tail USB port. It will take about 3-3.5 hours to fully charge the battery with 1A charger.
The battery power symbol on OLED screen will keep slowly flashing during charging and go out when the battery is fully charged.